GVM WITH COIL REPLACEMENT REAR

AAA rear coil delete kit with automatic ride height control supplied and installed

*there is no inspection, mod plate or compliance included

AAA rear coil delete kit with automatic ride height control, Pro Diesel braced OE lower rear control arms, CAT6 indicators to front guards, labour, wheel alignment, engineering compliance for the airbag conversion

*does not include the 4wd mode kit to disable the ride height when 4wd H or L is selected. This can be optioned when booking in the job and adds $725 to the total

By default, as part of the certification a 330kg GVM increase is included at no extra cost

2230kg RAC

1650kg FAC

AAA rear coil delete kit with automatic ride height control, Pro Diesel braced OE lower rear control arms, Pedders front coils, labour, wheel alignment, CAT6 indicators to front guards, engineering certification

430kg GVM increase

2230kg RAC

1750kg FAC

AAA rear coil delete kit with automatic ride height control and modified lower bag mount plates, Pro Diesel braced OE lower rear control arms with offset toe bushes installed, Dobinsons front coils, Blackhawk front upper control arms, CAT6 indicators to front guards, labour, wheel alignment, engineering certification

500kg GVM increase

2230kg RAC

1815kg FAC

The 4WD off mode is an additional feature that disables the ride height control system when 4WD (high or low range) is selected

All kits and installs include the large (twin) compressor as standard

4wd mode kit can be retrofitted to a pre-existing install

The compressor is ignition switched as per VSB14 regulation Installation of a mechanical switch in the compressor circuit voids compliance

It is recommended to have all permanent additional vehicle weight (ie drawer systems, barwork etc) fitted to the vehicle prior to the suspension works. The vehicle will be sprung for the 'as presented' condition. We cannot over spring the vehicle for future weight add on

OEM wheel and tyre may be used up to 4000kg GVM

295/70/18 tyres are compliant on all gvm packages

35" tyres are non compliant

If a vehicle presents in a non compliant form the job will be cancelled and will need to be re-booked